Ring Size Guide
Here at Louis Meyer, we can re size most rings we have for sale to your required size in our workshop. Some styles however cannot be re sized and we will usually indicate this on the product information page.
If you need help working out your finger size, you can download our free printable ring sizer here. Simply print the page, cut around the dotted line of the sizer and follow the instructions below.
Simply download the PDF file above, print to scale on A4 paper, and using a pair of scissors cut around the dotted lines to reveal your finger sizer.
You can check the document is printed to scale by measuring the 5cm line once printed.
Make a slit in the sizer where shown, and wrap the band sizer around your finger, with the end of the band poking through the slit you’ve made.
The sizer should fit comfortably around your finger, take care to ensure it is not too tight. Make sure you can remove the sizer over your knuckle.
The letter indicated by the “Ring Size” in the slit indicates the ring size you will need. This guide is for indication purposes only, and should you have any questions please get in touch with us directly and we will be happy to assist you in any way.
View our Ring Size Comparison Chart to convert UK and International sizes.
Find your ring size with our International Conversion Chart
| Ring Diameter (Inside) | Ring Circumference (Inside) | ‹ International Standard Sizes › | ||||
| MM | Inches | MM | Inches | Britan & Australia | USA & Canada | Europe |
| 9.9 | 0.390 | 31.1 | 1.22 | · | 0000 | · |
| 10.7 | 0.442 | 33.7 | 1.39 | · | 00 | · |
| 11.5 | 0.454 | 36.2 | 1.43 | · | 0 | · |
| 12.0 | 0.470 | 37.5 | 1.50 | A | 1/2 | · |
| 12.2 | 0.479 | 38.3 | 1.51 | A 1/2 | 3/4 | · |
| 12.4 | 0.487 | 38.9 | 1.53 | B | 1 | · |
| 12.6 | 0.506 | 39.6 | 1.56 | B 1/2 | 1 1/4 | · |
| 12.8 | 0.503 | 40.2 | 1.58 | C | 1 1/2 | · |
| 13.0 | 0.511 | 40.8 | 1.61 | C 1/2 | 1 3/4 | · |
| 13.2 | 0.520 | 41.5 | 1.63 | D | 2 | 41 1/2 |
| 13.4 | 0.528 | 42.1 | 1.66 | D 1/2 | 2 1/4 | · |
| 13.6 | 0.536 | 42.8 | 1.68 | E | 2 1/2 | 42 3/4 |
| 13.8 | 0.544 | 43.5 | 1.71 | E 1/2 | 2 3/4 | · |
| 14.0 | 0.553 | 44.1 | 1.74 | F | 3 | 44 |
| 14.2 | 0.557 | 44.5 | 1.75 | F 1/2 | 3 1/8 | · |
| 14.3 | 0.561 | 44.8 | 1.76 | F 3/4 | 3 1/4 | · |
| 14.4 | 0.565 | 45.1 | 1.77 | G | 3 3/8 | 45 1/4 |
| 14.5 | 0.568 | 45.4 | 1.79 | G 1/4 | 3 1/2 | · |
| 14.6 | 0.573 | 45.7 | 1.80 | G 1/2 | 3 5/8 | · |
| 14.7 | 0.576 | 46.0 | 1.81 | H | 3 3/4 | 46 1/2 |
| 14.9 | 0.585 | 46.7 | 1.84 | H 1/2 | 4 | · |
| 15.0 | 0.592 | 47.3 | 1.86 | I | 4 1/4 | 47 3/4 |
| 15.3 | 0.601 | 48.0 | 1.89 | I 1/2 | 4 1/2 | · |
| 15.4 | 0.606 | 48.4 | 1.90 | J | 4 5/8 | 50 |
| 15.5 | 0.611 | 48.8 | 1.92 | J 1/4 | 4 3/4 | · |
| 15.7 | 0.618 | 50.3 | 1.94 | J 1/2 | 5 | · |
| 15.8 | 0.622 | 50.6 | 1.95 | K | 5 1/8 | 50 |
| 15.9 | 0.625 | 50.0 | 1.97 | K 1/4 | 5 1/4 | · |
| 16.0 | 0.630 | 50.3 | 1.98 | K 1/2 | 5 3/8 | · |
| 16.1 | 0.634 | 50.6 | 1.99 | L | 5 1/2 | 51 3/4 |
| 16.3 | 0.642 | 51.2 | 2.02 | L 1/4 | 5 3/4 | · |
| 16.4 | 0.646 | 51.6 | 2.03 | L 1/2 | 5 7/8 | · |
| 16.5 | 0.650 | 51.9 | 2.04 | M | 6 | 52 3/4 |
| 16.7 | 0.658 | 52.5 | 2.07 | M 1/2 | 6 1/4 | · |
| 16.9 | 0.666 | 53.2 | 2.09 | N | 6 1/2 | 54 |
| 17.1 | 0.674 | 53.8 | 2.12 | N 1/2 | 6 3/4 | · |
| 17.4 | 0.683 | 54.5 | 2.15 | O | 7 | 55 1/4 |
| 17.5 | 0.687 | 54.8 | 2.16 | O 1/2 | 7 1/4 | · |
| 17.8 | 0.698 | 55.8 | 2.20 | P | 7 1/2 | 56 1/2 |
| 18.0 | 0.707 | 56.5 | 2.22 | P 1/2 | 7 3/4 | · |
| 18.2 | 0.716 | 57.1 | 2.25 | Q | 8 | 57 3/4 |
| 18.4 | 0.722 | 57.7 | 2.27 | Q 1/2 | 8 1/4 | · |
| 18.5 | 0.729 | 58.2 | 2.29 | Q 3/4 | 8 1/2 | · |
| 18.6 | 0.733 | 58.5 | 2.30 | R | 8 5/8 | 59 |
| 18.7 | 0.736 | 58.7 | 2.31 | R 1/4 | 8 3/4 | · |
| 18.8 | 0.740 | 59.1 | 2.32 | R 1/2 | 8 7/8 | · |
| 18.9 | 0.743 | 59.3 | 2.35 | R 3/4 | 9 | · |
| 19.1 | 0.752 | 60.0 | 2.36 | S | 9 1/8 | 60 1/4 |
| 19.2 | 0.757 | 60.4 | 2.38 | S 1/4 | 9 1/4 | · |
| 19.3 | 0.760 | 60.7 | 2.39 | S 1/2 | 9 3/8 | · |
| 19.4 | 0.764 | 61.0 | 2.40 | S 3/4 | 9 1/2 | · |
| 19.5 | 0.768 | 61.3 | 2.41 | T | 9 5/8 | 61 1/2 |
| 19.6 | 0.772 | 61.6 | 2.43 | T 1/4 | 9 3/4 | · |
| 19.8 | 0.781 | 62.3 | 2.45 | T 1/2 | 10 | · |
| 20.0 | 0.780 | 62.9 | 2.48 | U | 10 1/4 | 62 3/4 |
| 20.2 | 0.795 | 63.5 | 2.50 | U 1/2 | 10 1/2 | · |
| 20.3 | 0.800 | 63.8 | 2.51 | V | 10 5/8 | 63 |
| 20.4 | 0.805 | 64.2 | 2.53 | V 1/4 | 10 3/4 | · |
| 20.7 | 0.814 | 65.0 | 2.56 | V 1/2 | 11 | · |
| 20.8 | 0.817 | 65.2 | 2.57 | W | 11 1/8 | 65 |
| 20.9 | 0.821 | 65.5 | 2.58 | W 1/4 | 11 1/4 | · |
| 20.9 | 0.824 | 65.8 | 2.59 | W 1/2 | 11 3/8 | · |
| 21.0 | 0.830 | 66.2 | 2.61 | W 3/4 | 11 1/2 | · |
| 21.2 | 0.834 | 66.5 | 2.62 | X | 11 5/8 | 66 1/4 |
| 21.2 | 0.836 | 66.7 | 2.63 | X 1/4 | 11 3/4 | · |
| 21.3 | 0.838 | 66.9 | 2.64 | X 1/2 | 11 7/8 | · |
| 21.5 | 0.846 | 67.5 | 2.66 | Y | 12 | 67 1/2 |
| 21.7 | 0.854 | 68.1 | 2.68 | Y 1/2 | 12 1/4 | · |
| 21.9 | 0.861 | 68.8 | 2.71 | Z | 12 1/2 | 68 3/4 |
| 22.1 | 0.870 | 69.4 | 2.73 | Z +1/2 | 12 3/4 | · |
| 22.3 | 0.879 | 70.2 | 2.76 | Z+1 | 13 | · |
| 22.6 | 0.890 | 71.0 | 2.80 | Z+1.5 | 13.5 | · |
| 22.7 | 0.893 | 71.3 | 2.81 | Z+2 | · | · |
| 22.9 | 0.902 | 72.0 | 2.83 | Z+2.5 | · | · |
| 23.0 | 0.908 | 72.5 | 2.85 | Z+3 | · | · |
| 23.3 | 0.915 | 73.0 | 2.87 | Z+3.5 | · | · |
| 23.5 | 0.924 | 73.7 | 2.90 | Z+4 | · | · |
| 23.6 | 0.927 | 74.0 | 2.91 | Z+4.5 | · | · |
| 23.9 | 0.940 | 75.0 | 2.95 | Z+5 | · | · |
| 24.3 | 0.955 | 76.2 | 3.00 | Z+6 | · | · |